This site
Copyright © 2002-2008 by
Technological Artisans, Inc.
All Rights Reserved

BABETTE/1 LISSAJOUS CONTROLLERS

Advanced "Planetarium" Processor

Spirographic, Lissajous, Radius Modulator and Analog computer based pattern generation.
Features: Two function generators with 5 variable frequency, ranges, 6 waveforms and control of on/off as well as offset and size. Two Sin/Cos oscillators with variable frequency, 5 frequency ranges, control of Sin/Cos on/off as well as offset and size. One analog modulator capable of all mathematical functions as well as mixing and control of offset and size. One stereo aux. input for an external line level source. Tape deck inputs and outputs for recording and playback of patterns. Master Gain control and X an Y position control. Input and Output busses for attachment to other controllers. Housed in a 19" rack case, 8" high. High power X and Y outputs directly drive open loop projectors. Line level X and Y outputs also available. TTY level shutter output to trigger a shutter.

BABETTE/2 LISSAJOUS CONTROLLERS

Entry Level "Planetarium" Processor

Spirographic / Lissajous pattern generation.
Features: One 60hz base Sin/Cos quadrature oscillator with adjustable Sin/Cos gain. Two Sin/Cos oscillators with 5 variable frequency ranges, control of Sin/Cos on/off as well as offset and size. One stereo aux. input for an external line level source. Tape deck inputs and outputs for recording and playback of patterns. Master Gain control and X and Y position control. Output buss for attachment to other controllers. Housed in a 19" wide rack case, 5.75" high 10" deep. High power X and Y outputs directly drive open loop projectors. Line level X and Y outputs also available. TTY level shutter output to trigger a shutter.

LASEBUSS SC-1000 QUADRATURE SIN/COS GENERATOR

The SC-1000 is a sine and cosine function generator circuit board, modularity designed to fit into any new or existing system. It covers a frequency span of .01 Hz to 10 KHz, with four selectable ranges, each continuously varying in a 20:1 ratio. Sine and cosine waveforms are variable to 10V p-p, with an adjustable offset of +/-5V dc. Trimmers allow user-adjustment of maximum waveform output level The 6" x 4.5" fiberglass circuit board plugs into a 22/44 pin-edge card connector and is compatible with industry-standard card cages. Switches and controls connect via 16-pin dip sockets. The SC-1000 facilitates making audio oscillators, bench-top test equipment, communication devices and laser entertainment systems. It is fully compatible with optional Technological Artisans' LaseBuss(tm). Pre-wired front panel controls and switches are available.

ORDER:
SC-1000 - Assembled and tested.
SC-1010 - Prewired frequency controls.
SC-1020 - Prewired gain / offset controls.

LASEBUSS AM-1000 ANALOG MULTIPLIER

The AM-1000 is a sophisticated and flexible dual channel analog processor modularity designed to fit into any new or existing system. The AM-1000 performs all fundamental mathematical operations including multiplication, division , addition and subtraction. All signals are DC coupled to allow for the use on constants. Signal levels up to +/- 10 volts are supported. Trimmers allow user-optimization of linearity and baseline offset. The 6" x 4.5" fiberglass circuit board which plugs into a 22/44 pin-edge card connector is compatible with industry-standard card cages. Switches and controls connect via 16-pin dip sockets. The AM-1000 facilitates making voltage controlled amplifiers, complex abstract image generators, and image rotators. It is fully compatible with optional Technological Artisans' LaseBuss(tm). Pre-wired front panel controls and switches are available.

ORDER:
AM-1000 - Assembled and tested.
AM-1010 - Prewired symmetry trim controls.
AM-1020 - Prewired gain / offset controls.
AM-1030 - Prewired input switch matrix.

LASEBUSS FG-1000 FUNCTION GENERATOR

The FG-1000 is a 100 KHz function generator circuit board, modularity designed to fit into any new or existing system. It covers a frequency span of .01 Hz to 100 KHz, with six selectable ranges, each continuously varying in a 100:1 ratio. Sine, haver sign, triangle, ramp, pulse and square waves are selectable and variable to 10V p-p, with an adjustable offset of +/-5V dc. Trimmers allow user-adjustment of sine and triangle symmetry, sine and triangle distortion, maximum triangle output level, and maximum sine wave output level. The 6" x 4.5" fiberglass circuit board which plugs into a 22/44 pin-edge card connector is compatible with industry-standard card cages. Switches and controls connect via 16-pin dip sockets. The FG-1000 facilitates making audio oscillators, bench-top test equipment, communication devices and laser entertainment systems. It is fully compatible with optional Technological Artisans' LaseBuss(tm). Pre-wired front panel controls and switches are available.

ORDER:
FG-1000 - Function Generator. Assembled and tested.
FG-1010 - Prewired gain / offset / waveform controls.
FG-1020 - Prewired range / frequency controls.

LASEBUSS CM-1000 COLOR MIXER

The CM-1000 is a Color Mixing circuit board, modularity designed to fit into any new or existing system. It allows the selection and mixing of any combination of LaseBuss signals into a composite signal for driving the RGB color outputs. The 6" x 4.5" fiberglass circuit board which plugs into a 22/44 pin-edge card connector is compatible with industry-standard card cages. Switches and controls connect via 16-pin dip sockets. The CM-1000 facilitates the mapping of abstract signals to RGB color values in laser entertainment systems. It is fully compatible with optional Technological Artisans' LaseBuss(tm). Pre-wired front panel controls and switches are available.

ORDER:
CM-1000 - Color Mixer. Assembled and tested.

LASEBUSS LD-1000 LINE DRIVER

The LD-1000 is a Line Driver circuit board, modularity designed to fit into any new or existing system. It takes as inputs the XYZ and RGB LaseBuss signal lines and buffers them to interface to the outside world. The buffered output signals are balanced for noise free transmission over long runs. The board also includes a driver for a standard 12VDC mechanical master shutter The 6" x 4.5" fiberglass circuit board which plugs into a 22/44 pin-edge card connector is compatible with industry-standard card cages. Switches, controls and external line outputs connect via 16-pin dip sockets. The LD-1000 facilitates the interfacing of unbalanced signal sources in laser entertainment systems. It is fully compatible with optional Technological Artisans' LaseBuss(tm). Pre-wired front panel controls and switches, and output jack panels are available.

ORDER:
LD-1000 - Assembled and tested.
LD-1010 - Prewired shutter switch controls.
LD-1020 - Prewired line output jack panel.

LASEBUSS OM-1000 OUTPUT MIXER

The OM-1000 is a Output Mixing circuit board, modularity designed to fit into any new or existing system. It allows the selection and mixing of any combination of LaseBuss signals into a composite signal for driving the main XYZ outputs. The 6" x 4.5" fiberglass circuit board which plugs into a 22/44 pin-edge card connector is compatible with industry-standard card cages. Switches and controls connect via 16-pin dip sockets. The CM-1000 facilitates the selection and mixing of the final XYZ signals in laser entertainment systems. It is fully compatible with optional Technological Artisans' LaseBuss(tm). Pre-wired front panel controls and switches are available.

ORDER:
OM-1000 - Assembled and tested.